Crash bar wraps with diamond cutouts
These new crash bar covers feature diamond cutouts, with colored alligator lining around the edges. We also added studs and crystals in the center, giving them a striking look!
If you have foot pegs on your crash bars, please fill in the measurements for the upper and lower pieces below in the drop down menu. If you don’t have foot pegs, just fill out the “upper” part for the overall length that you need. These wraps fit engine bars with 4″ circumference, or saddlebag guards with a 3.25″ circumference.
Description
This set of crash bar wraps with diamond cutouts is a very nice addition to dress up your bike. It is available in several accent colors to match you heat shield.
It is very important that you measure correctly. If you have foot pegs, you will need the “upper” and “lower” part. When you order a quantity on “1”, you will get a total of four pieces.
If you don’t have foot pegs and are not planning to get them, just put your measurement of how much you want to cover in “upper”. Some only want to cover the kink where the bike falls onto. Others want to cover the whole length. It is up to your vision of what you want to achieve.
We have seen different youtube videos on how to attach your Crash bar wraps with diamond cutouts that are not from us. We recommend to lace them on like you lace your shoes. Get a 5 gallon bucket to sit on and start on the top. Face the lacing towards you for that part. When you go back to tighten the lacing, turn the wrap around, so the lacing is on the inside.
Dimensions: For front engine guard wraps, our standard width is 4 inches. For saddlebag guards it is 3.25 inches. If you have custom bars with a different circumference, please put that information in “notes for seller” during checkout.
Reviews
There are no reviews yet.